
Job Information
Army National Guard Units ELECTRONICS MECHANIC (TITLE 32) in Ellington AFB, Texas
Summary This position is within TX State Aviation Office (SAO) and is located at the Houston Army Aviation Support Facility (HAASF) in Ellington Field JRB, Houston, Texas. Its purpose is to perform repair, maintenance, modification, overhaul and installation of complex electronic systems and/or a portion of a complete electronic integrated system involving work on a number of subsystems but not requiring the integration of all operable subsystems into a functional integrated system. Responsibilities As an ELECTRONICS MECHANIC with the Texas Army National Guard, your duties will include, but will not be limited to: Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include: navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment. Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft. Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories,programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Performs other duties as assigned. Requirements Conditions of Employment Appointment Factor(s): This is an Excepted Service position that requires active membership in a compatible military assignment in the Texas Army National Guard and wear of the military uniform. Areas of Consideration: CAT-1: Nationwide Excepted. This includes: All currently employed T32/T5 full-time permanent, indefinite and temporary personnel of the Texas Army/Air National Guard. All current members of the Texas Army/Air National Guard; and individuals eligible for immediate membership in the Texas Army National Guard. Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office. Remarks: The Texas National Guard is an Equal Opportunity employer. This is a Non-Bargaining Unit position. Veterans' preference is not applicable to this position. Texas Army National Guard Membership is required. Federal employment suitability as determined by a background investigation. Must be able to obtain and maintain the appropriate security clearance of the position. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. May be required to successfully complete a probationary period. Direct deposit is mandatory. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). Qualifications To be considered for qualification, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following: Minimum Requirements: WG - Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics. Specialized Experience Required To qualify at the WG-11 grade level, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following: Experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. Quality of Experience: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position Military Requirements This is an excepted service position that requires membership in a compatible military assignment in the Texas Army National Guard. Applicants who are not currently a member of the Texas Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. ECMF: 15 RANK: Enlisted: E1/PVT through E7/SFC Education There is no education requirement. Additional Information Texas is one of 9 states with NO state income tax. Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment. SKILL AND KNOWLEDGE: (1) Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in complex electronic systems or individual subsystems of an electronic integrated system. (2) Thorough knowledge of the principles of digital and analog circuits, electro-mechanical devices, solid state devices theory, digital techniques, synchro/servo operation and integrated circuit theory. (3) Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work related problems. (4) Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques. (5) Knowledge of The Army Maintenance Management Systems (TAMMS) and other publications and directives as may be applicable to the function.